- Видео 144
- Просмотров 9 926 616
Nate Large - Woodworking DIY & More
США
Добавлен 31 дек 2013
Woodworking DIY & More
Disclaimer: These videos are intended for entertainment and inspiration only. Woodworking and making stuff is dangerous. Always seek professional advice and training before using any power tools. If you have any uncertainty before performing any woodworking or fabricating procedure, stop and learn a safer method. Do not attempt anything simply because you saw it in one of my videos. Summary: be smart, use common sense, and respect your power tools.
Disclaimer: These videos are intended for entertainment and inspiration only. Woodworking and making stuff is dangerous. Always seek professional advice and training before using any power tools. If you have any uncertainty before performing any woodworking or fabricating procedure, stop and learn a safer method. Do not attempt anything simply because you saw it in one of my videos. Summary: be smart, use common sense, and respect your power tools.
Mastering Maritime Slumber - Canvas Navy Hammock Making: Part 2 (or a sailors hammock)
Spurred grommets are used to keep the grommets from ripping out. product images used in this video were taken from sailrite and are used under fair use. I purchased all grommets and related items from sailrite.com
Sailrite did not sponsor this video, I tell this to help you if you are looking for where I purchased the items discussed in this video.
All Videos produced by Nate Large - Woodworking DIY & More’s RUclips Channel are provided for informational purposes only.
All the content provided is for general guidance only. Because tools, products, materials, equipment, techniques, building codes and local regulations are constantly changing, Nate Large - Woodworking DIY & More cannot, and d...
Sailrite did not sponsor this video, I tell this to help you if you are looking for where I purchased the items discussed in this video.
All Videos produced by Nate Large - Woodworking DIY & More’s RUclips Channel are provided for informational purposes only.
All the content provided is for general guidance only. Because tools, products, materials, equipment, techniques, building codes and local regulations are constantly changing, Nate Large - Woodworking DIY & More cannot, and d...
Просмотров: 15 258
Видео
Sewing the Canvas - part 1: Making a Canvas Navy Hammock (aka sailors hammock)
Просмотров 22 тыс.2 года назад
The canvas hammock was used by sailors for centuries. They are my favorite type of hammock with a long tradition. All Videos produced by Nate Large - Woodworking DIY & More’s RUclips Channel are provided for informational purposes only. All the content provided is for general guidance only. Because tools, products, materials, equipment, techniques, building codes and local regulations are const...
Spurred Grommet US Navy hammock #shorts
Просмотров 2,6 тыс.2 года назад
Adding a #4 Nickle plated brass spurred grommet to my grandfathers WW2 US navy hammock. Spurred grommets are the real deal. The spurs on the grommets keep the fabric from being pulled out from around the grommet. Anyone know where I can get #4 galvanized spurred grommets? #DIY #navy #sailing #hammock #sail #wwii #ww2 #diyprojects
Are WD-40 and 3-in-One Oil the same? #shorts
Просмотров 2,7 тыс.2 года назад
which is better WD40 or 3-in-One Oil? What is the difference between 3-in-1 oil and WD0-40 ? 🎟️ Subscribe! goo.gl/Co1oRz 📷 Instagram _natelarge All Videos produced by Nate Large - Woodworking DIY & More’s RUclips Channel are provided for informational purposes only. All the content provided is for general guidance only. Because tools, products, materials, equipment, techniques, b...
Are WD-40 and 3-in-One Oil the same?
Просмотров 37 тыс.2 года назад
which is better WD40 or 3-in-One Oil? What is the difference between 3-in-1 oil and WD0-40 ? 🎟️ Subscribe! goo.gl/Co1oRz 📷 Instagram _natelarge All Videos produced by Nate Large - Woodworking DIY & More’s RUclips Channel are provided for informational purposes only. All the content provided is for general guidance only. Because tools, products, materials, equipment, techniques, b...
Using CA glue to quickly make a Magnetic Pickup Sweeper - Superglue tips included
Просмотров 2,8 тыс.2 года назад
Get Starbond's essential product bundle which consists of the clear thin CA, medium CA, thick CA, and accelerator at 15% OFF using the discount code NATE15 at checkout Click here bit.ly/3IuRMui to visit the product page Use of this code and link may earn me an affiliate commission. I was simply asked to make a video featuring Starbond Superglue. I choose to make a project that would showcase ma...
Removing paint from metal hardware. Easy to do DIY home restoration project
Просмотров 129 тыс.2 года назад
How can I remove paint from hinges knobs latches? Why do people paint hardware? Even cheap hardware looks better then painted hardware. 🎟️ Subscribe! goo.gl/Co1oRz 📷 Instagram _natelarge ⚠️Warning: Woodworking can be potentially life threatening. Do not attempt any woodworking project without familiarizing yourself with important safety information regarding the tools and procedu...
Oiling a squeaky hinge to improve my 🤪 sanity
Просмотров 3,6 тыс.2 года назад
3 in 1 oil is for the win. 🎟️ Subscribe! goo.gl/Co1oRz 📷 Instagram _natelarge ⚠️Warning: Woodworking can be potentially life threatening. Do not attempt any woodworking project without familiarizing yourself with important safety information regarding the tools and procedures you will use. This video makes no attempt at covering all required safety and procedural information to s...
1 Year Review: Makita 3-1/4" Planer Kit KP0800K (tool overview)
Просмотров 31 тыс.2 года назад
KP0800K 3‑1/4" Planer, with Tool Case POWER : 6.5 AMP motor delivers more output power for increased stock removal and superior finishes CAPACITY : Planes 3-1/4” wide and 3/32” deep in a single pass PRECISION : Precision machined aluminum base for planing accuracy CONVENIENCE : Spring-loaded stand elevates the base to protect the blades and workpiece INCLUDES : Blade gauge assembly, wrench, gui...
Cabinet Hardware Jig 1934e by True Position Tools
Просмотров 1,5 тыс.2 года назад
This was not a sponsored video. I did receive this tool from True Position Tools in exchange for my personal feedback on their Cabinet Hardware Jig 1934e for their internal use only. Prior to the release of this video I completed my obligation to them. I made this video of my own free will and without obligation to do so. All opinions expressed in this video are my own words and True Position T...
FrogTape or Scotch Sharp Lines? Which painters tape is better at making clean straight lines?
Просмотров 10 тыс.2 года назад
A side by side test of two premium painters tape. Which one will get you better lines with less bleed through. FrogTape uses PaintBlock(tm) technology and Scotch uses Edge Lock(tm) technology; to seal out paint. 🎟️ Subscribe! goo.gl/Co1oRz 📷 Instagram _natelarge ⚠️Warning: Woodworking can be potentially life threatening. Do not attempt any woodworking project without familiarizin...
Chalkboard paint which one is better paint or spray? Rust-oleum vs Krylon
Просмотров 11 тыс.2 года назад
I didn't know what I would find when testing these two products against each other. 🎟️ Subscribe! goo.gl/Co1oRz 📷 Instagram _natelarge ⚠️Warning: Woodworking can be potentially life threatening. Do not attempt any woodworking project without familiarizing yourself with important safety information regarding the tools and procedures you will use. This video makes no attempt at cov...
Tool Review Powermatic PM2200 CYCLONIC DUST COLLECTOR - WITH HEPA FILTER KIT
Просмотров 3,9 тыс.2 года назад
Is a HEPA dust collector worth the expense? Is it work buying a large dust collector? With 1543 CFM this unit will capture most of the mess as it is being made at the tool. 🎟️ Subscribe! goo.gl/Co1oRz 📷 Instagram _natelarge ⚠️Warning: Woodworking can be potentially life threatening. Do not attempt any woodworking project without familiarizing yourself with important safety inform...
Does Chalkboard Paint by Rust-Oleum work?
Просмотров 16 тыс.2 года назад
I test chalkboard paint on 10 surfaces to see how it works. Do you need to use primer? Will it stick to metal, glass, acrylic, plexiglass... Making a blackboard surface 🎟️ Subscribe! goo.gl/Co1oRz 📷 Instagram _natelarge ⚠️Warning: Woodworking can be potentially life threatening. Do not attempt any woodworking project without familiarizing yourself with important safety informatio...
Great joint
Will this work with lead based paint?
Thanks!
Thank you!
This was really helpful! I want to make a magnetic wall in my daughters playroom and make some wooden gears with magnets on the back, various other things for ger to play with. Im thinking for my application maybe sheet metal would be better.
For my purpose, I think this paint will work perfectly. I’m building a slot car track with some pretty big elevation changes. I’m going to use this paint to give me better downforce in some of the more intense curves. (One of which mimics Laguna Seca’s world famous Corkscrew.) As it is, the roughly 3/16” rails are the only source of magnatraction in those areas and you can lose control VERY easily. My plan is to paint a 1”strip just inside & outside of the rails of my slot car track. The second coat will be 3/4” and the third will be 1/2”. I’m hoping to give a smoother, more controllable drift in those particularly tricky areas of the track. This review was extremely helpful, THANKS!
Çok teşekkürler en ayrıntılı ve açık anlatan sizsiniz
awesome visuals! thank you for the great explanation
just found this today (2024) and still very helpful and loved the video! 🎉
I hate that the fence bracket is proud of the table top. That means work pieces fall down to the table after clearing the fence bracket. What were they thinking? I bought mine when they were transitioning to the newer (cost reduced?) model. I specifically chose the older model because it seemed to be built better. The blade wobbles when first turned on. So don't put the fence too close to the blade. Otherwise the blade will scrape the side of the fence -- don't ask me why I know.
Nice! Thanks for the tip. It’s so simple yet effective.
What's the best way to dispose of the water? I live in an old house and may be dealing with lead paint. 😬
can baking power do the job too?
Excellent, I really appreciate these kind of videos. Thank you very much, sir.
Wow very creative
Спасибо🙏💕😊❤
Bake a teacake, take it to your neighbours, ask them to help you lift it. Three people and a second borrowed ladder will make short work of the lifting, and then you aren't stuck with about 8 metres of chain that you now have no use for.
terrible presentation on a good product
Great explanation
Thank you for this tutorial! After the repair should the cord be restricted to indoor use, or is is still appropriate for exterior use? I have a couple of previous heavy duty outdoor use cords I would like to repair, but that new connector doesn't appear it would block moisture, or would it? TIA for any further clarification you can add. 🤔🤔🤔
But you should compare krylon Spray to Krylon CAN.....you don t have "control"..... so your results are not reliable
well done Nate, thanks :D
I lost the remote... it should work without remote right? mine wont run with the buttons on the unit. fuse maybe? Not my circuit breaker. Thanks
Could I use this on see through polycarbonate sheet?
Super,beginner friendly. Thanks
I hate the fence on this saw. So hard to get a straight cut. Thanks for your suggestions to fix this.
The trick is to ensure the mitre slot is parallel to the blade. Then insert a 1" strip of wood lengthwise into the slot and slide the fence to the board.
Thanks for the advice!
Good down to earth 😅 information.thanks
When I watch your videos I also pine for the bulk of a larger one
brushless motors are very efficient. you explained it wrong. the circuit needed for it is where all the difference. circuit is not for maintaining power rather it is the one who gives the power to start with.
Very inteligent and interesting way to explain something that can be very confusing for most. The visuals removes all doubts. Thank you!
would it work on high water exposure area, ie next to shower
Thanks 👏👏no rocket…
Thank you for the straight forward video, the ground on the washer broke and I really don’t want to buy a new washer !!
thanks man that was very helpful.......
It’s very precious when handmade 😊🥰☺️
Sockets do come with holders you know .
😂
Thank you! Very well done video!
Acetone..wow..nice video
Subbed 👍
A nice strong design. Well done!
I lost my safety switch do you know where it is can get one?
Fun, simple projects. Thanks for sharing.
No need to make so complicated, nor use so much wood.
Great Video! I keep 2 cans in my studio for small projects, I love it!
Anyone know if this can hold kids magnetic tile toys?
p😅
I inherited one of these and a house I bought. I had no idea what it was. Thank you. Subscribed.
No long intro, just straight to the point. Subbed ✅️